Видео

The connection to the water supply on my supply line is impossible to remove! Any tips? Thank you

I live in a 1970s home and I don’t think mine has one of those. Should I have one installed or do I call a plumber to decrease the water pressure cause I think it’s super high

do all homes have a water pressure regulator??

Super helpful, sir! Thank you so much!! onto my next project!

Made it easy to change the drain and save some money. Literally took 5 mins. Good info, thanks!

You’re so far and I can’t follow the steps your doing

Just checked my water pressure. It was at 37. I went and cranked up the regulator and the pressure has not moved at all :(

On the sharkbite website, it says these can be used with copper and the o ring can stay

looks easy but not so much. First cross pieces blew apart. So on to tub drain extractor - even with tapping down the extractor - just spins - no grip. maybe cheap nickel drain

At 1:50 - that’s what is stuff for me!! Won’t budge!! Any suggestions? Husband is strong and even he couldn’t move it a bit!!

When you tighten (or loosen) the pressure regulating valve, just to be clear, the water to the house needs to be shut-off, correct? and after the water is shut off, a toilet flushed, or have a faucet running to remove any pressure within the line? Is that correct?

I was skeptical. But then I saw the buttcrack and knew you were a real tradesman

Thank you very much you just saved me a lot!!!!

thanks , this is simple and easy to understand. i will try this because 3 of my hot water pipes burst.

This isnt an easy job to do most of the time

I went to put in my new drain and there was a white silicone type gasket in there. Should I still add plumbers putty or just reuse the gasket? Great video!

When i got my house the manager told me to be careful adjusting the water pressure because I could blow the faucets off the wall. In the video you said the regulator wont let it get over 75 even if you screwed it all the way down. Why did he tell me that when he is the building manager hahahaha. mine is rated for 15-75.

The gasket is actually for the strainer, not under the tub. The instructions indicate this. Plumbers putty also works. Thanks for sharing.

Thank you

Thanks dude. Here I was trying to get the old drain out with channel locks I'm like "there must be some tool for this" XD

I cringe watching metal tools flying around. Great way to ding the porcelain. Where is a heavy rag or towel?

Thank you

Thank you buddy! Was dreading this job. It's actually very easy. God bless!

Awesome!!! The best video on RUclips for natural gas water heater installation!! Could you tell what part number at Home Depot for the fitting without soldering ? Much appreciated for your sharing!

Very good video. Now my tub is fixed. Thank you so much.

What if your pressure does not go up or down no matter which way you turn it?

I was worried when ours went out, but I had it fixed in no time. Thank you from all RUclips warriors. The one extra tool I needed was a “tub drain extractor” as ours was too corroded to use the wrench to turn it out. -Hope that helps someone in the future!

Thank you so much!

Just did a tub drain replacement. Well, just tried. First, tub wrench worked on old drain. BUT, it did not fit the new drain! Holes in a new drain from Home Depot required me to file down the four parts of the wrench. THEN, the new drain would not screw into the tub. The old one screwed in and out well, but the new one screwed in easily for several turns, then stopped dead, and I mean no way to turn it, even with tub wrench. As if I cross-threaded it except the first several turns went super-easy and felt correct. Not sure what to do now but return the new drain and try another? Any help? I even greased the threads and cleaned out the tub threads with a wire brush. Thanks.

Hi, I don't have the tighten screw on mine, just the brass one. Is that bad?

Straight forward bud thank u

Thank you!❤

That is just the cosmetic drain hardware, and not the drain itself. I came here looking to replace the drain pipe. Perhaps the description could be more descriptive.

Great video thank u

No I didn’t. But now thanks to you I’ve learned something new

Who do you think has the best water softener

My drain has no cross sections in it

Can you do a close-up of how to remove the part with the plastic connection to the toilet tank? I'm not able to get that part off to connect a bidet. It's super tight. Do I use a tool and should I be turning it left to remove?

I did it as tight as I can but I broke the drain cross-section :( either Home Depot shouldn’t sell such a cheap drain, or we shouldn’t twist them in as hard as we can

My water pressure is exactly 90. Been living in this house for years with no problem. Should I be concerned?

Hey, thanks for all the chips and scratches in the paint job on my tub

What about this - my water pressure on the hot water side is about half of the pressure (or volume) on the cold-water side. In other words, all faucets push out a strong stream of cold water but a relatively weak stream of hot water. Why is that? I just spent a week replacing everything I could think of at the water heater itself: new feed hoses, new nipples, new expansion tank, new anode, flushed it 10 times. No effect on the pressure differential. Any ideas?

I like that cock (rooster ) tattoo on your left wrist... I bet you have a joke that goes with that 😂lmfao

Excellent

Your videos are amazing !!!

After watching your video I installed today my! Thank you sharing I was scared

excellent,,,,thanks

Worked for me. God bless you brother

What about if i dont have one?

I need to do this for my tub. However, when i removed the drain, it actually had a disintegrated rubber gasket under mine. Was this something that shouldn't have been used in the first place or do i actually need it?